TLI ToolkitTorchlight: Infinite companionDownload

Help

FAQ & setup

Most problems come down to the game’s log: it has to be on, and the game has to have written your character into it. Start with the first three answers. Still stuck? Open an issue on GitHub or write to hello@tlitoolkit.com.

Setup

The app says the log is off, or nothing is tracked

In Torchlight: Infinite press Esc → Settings → Other, and under Account Related press the Enable Log button (a plain button, not a switch). The game turns logging off every time it starts, so it has to be pressed again after each launch. Once it worked, the app’s top bar says Game log connected and the Get tracking card ticks off Game logging is on. The app’s setup doctor reminds you when it notices the log has gone quiet.

The tracker isn’t working or shows nothing

Nearly always it is the game’s log. Go through these in order:

  • In the game press Enable Log again, after every launch: how.
  • Log in again after pressing it, and sort your bag once: why.
  • Check that the app found the right file: where the log is for Steam, the launcher and TapTap, or pick it in Settings → Game log → Browse.

Still empty? The FE tracker guide says what the tracker counts and what it leaves out, and Works with today’s patch? says whether a game update broke it. Otherwise press Ctrl+Alt+B and report it.

Why do I have to relog?

The game writes your character, hero and bag into the log when you log in. If you pressed Enable Log while already in the game, those lines were never written. Go back to character select and log in again, and the app detects your character. Sort your bag once as well, so the tracker knows every stack you already carry; until then it counts drops from what changes.

Where is the log? (Steam, standalone launcher, TapTap)

The app looks in all the usual places and picks the most recently written log. The file is always UE_game.log, under the game folder in UE_game\TorchLight\Saved\Logs\:

InstallTypical log location
Steam…\steamapps\common\Torchlight Infinite\UE_game\TorchLight\Saved\Logs\UE_game.log
Standalone launcher<install folder>\Game\UE_game\TorchLight\Saved\Logs\UE_game.log
TapTapThe folder you chose in TapTap; the app also finds it from the running game.

If it can’t find the file, pick it in Settings → Game log → Browse. A second game window writes UE_game_2.log; the app follows whichever was written last.

Windows or my antivirus warns about the .exe

TLI Toolkit isn’t code-signed yet (signing is planned). Windows SmartScreen shows “Windows protected your PC” for new unsigned programs: click More info, then Run anyway. Some antivirus tools flag unsigned or rarely downloaded programs as a precaution, a false positive that is common with new apps.

  • Only use the file from the official download, and check its SHA-256: if it matches the release, it is the published file.
  • If your antivirus quarantines it, you can restore it and add an exception, and report the false positive to your antivirus vendor (Microsoft Defender has a file submission form for this).
It’s a portable app: where does it keep my data?

The .exe runs from wherever you put it; there is no installer. Your history, settings, prices and builds library live in the app’s data folder in your Windows user profile, so they survive updates and moving the .exe. Avoid running it from a OneDrive or read-only folder: updates then can’t replace the file in place and are saved to Downloads instead.

Using the app

Does it have an overlay?

Yes. The mini window is a small always-on-top window over the game (windowed or borderless) with your live FE per hour, current map and latest loot; in Vorax and Tartarus it shows the move to make, and rings on the game screen point at it. Toggle it with Ctrl+Alt+O; Ctrl+Alt+L makes it click-through. It only reads the log file and the game’s picture and never touches the game: the overlay guide and Safety & privacy.

The mini window

A small always-on-top window with your live FE per hour, session stats, current map and latest loot; in a minigame it shows the move to make. Toggle it with Ctrl+Alt+O, the sidebar switch or the tray. Drag it by its header anywhere, including over the game in windowed or borderless mode, and resize it by its bottom edge. Ctrl+Alt+L locks it click-through so your clicks reach the game. Sizes and what it shows are in Settings → Mini window.

Hotkeys
DefaultWhat it does
Ctrl+Alt+OShow or hide the mini window
Ctrl+Alt+LLock the mini window click-through, or unlock it
Ctrl+Alt+PPrice check over the game
Ctrl+Alt+KPause or resume the session
Ctrl+Alt+RRead the game screen now (Vorax and Tartarus screen reading)
Ctrl+Alt+BMake a bug report (a zip on your PC)

Change any of them in Settings → Hotkeys: press the new keys. The app warns about clashes, about combinations Windows already uses, and when another program has taken one.

What does it track? Is it an FE tracker?

Yes: it’s an FE, loot and profit tracker for Torchlight: Infinite. From the game’s own log it counts every drop and what opening each map cost (beacon, compasses, probes), and values both at current prices. The Overview shows bag value, session profit and FE per hour; Maps shows runs, average profit, time and FE per hour per map; History shows profit per day and your best maps and drops. Nothing is typed in, and the game isn’t touched: see Safety & privacy. How the numbers are counted: the FE tracker guide.

Is there a build planner? Where do I plan my build?

Yes: the build planner on this site plans talents, skills, gear and Pactspirits, and the whole plan fits in one link. For a ready-made build, see the build guides. Keep the build code the game gives you in the app’s Builds & Filters page.

Why does my profit differ from what I picked up?

Profit is what dropped minus what opening the map cost: the beacon, compasses and probes, at their full price. With After tax on, drops are valued after the 12.5% Trade House tax (paid when you sell); what you spent is not taxed. Both switches are on the Overview.

FE per hour: real time or in map?

Real time counts the whole session: maps, town, hideout and trading. In map counts only time inside maps. Gaps of more than 5 minutes without game activity don’t count, and Pause stops the clock altogether.

Do I have to type the board in?

Vorax and Tartarus can read the board from the game window. Auto-read is on by default on the advisor page; turn it off there if you prefer, or press Read now (Ctrl+Alt+R). Vorax reads the cards, tanks, round, Ultimate Activity and refreshes; Tartarus reads the instrument offer and its re-rolls so far. Anything it isn’t sure of is shown with its guess and a Use button instead of being filled in.

Mistville needs no typing: the game writes its whole board to the log. In Arcana the log fills in the chests and life, and in the Void Sea it reads your whispers when you enter; the cells, flames and cards on offer are typed. Screen reading works with the English game client, windowed or borderless; a minimised game can’t be read.

The mini window doesn’t show in OBS display capture

On purpose: the app’s own windows (mini window, on-game rings, price check) are hidden from screen captures, so they never get in the way of screen reading. To show your stats on stream, turn on the OBS browser source in Settings and add it as a Browser Source.

The ring over the game is in the wrong place

The on-game highlights work in windowed and borderless modes at any resolution and UI scale. If a ring is a little off on your setup, nudge it in Settings → Highlights.

Is there a TLI price checker?

Yes, two ways. On this site the price list shows every tradable item’s current price in FE, and each item’s page has a 7-day chart. In the app, press Ctrl+Alt+P over the game for a price check, and the tracker, the bag and the advisors use the same prices. The numbers are community prices, not the game’s own; where they come from.

Where do prices come from? Can I use my own?

Public prices come from Trade House searches by TLI Toolkit and TITrack players. The app uses your own searches in preference to public prices. A price you set on the Items page takes priority over both. You can turn off the public feed in Settings.

Are strategy codes the same as gift codes?

No. A strategy code is a short text made by TLI Toolkit (it starts with TLS1.) that describes one farming setup: region, compasses and probes, Pactspirits and Void Chart, and optionally a build or filter code. Paste it in the strategy explorer to see how that setup does and the closest setups players run. It gives nothing in the game and is not something you redeem. The game’s own gift codes are on the codes page, with their status.

Why isn’t my run shown in the farming strategies?
  • A setup is listed in the strategy explorer once at least 2 different players have 10+ runs of it between them, so no single player is shown on their own (with 2 players, each can roughly work out the other’s numbers for that setup; no names are shown). The one exception is a setup you publish yourself from the app (the strategy code card, Publish on tlitoolkit.com): it is listed with your maps alone, marked “1 player”, because you asked for it.
  • Sharing has to be on in the app; runs are sent in small batches and the tables are rebuilt a few times a day.
  • Filters, the tier and the time-machine day all narrow the list; a setup counts each player’s latest 300 maps of it at most.
Which languages does it speak? Does my game client’s language matter?

The app speaks English, 简体中文, 한국어 and Русский: on first start it follows your Windows display language, and you can switch any time in Settings → Language. The tracker and the log-aware advisors work with any game client language. Screen reading reads the boards in any language, but instrument, treasure and incident names still need the English client. This website and its guides are in English for now.

Is it free? Who makes it?

Free, with no account needed and no ads or paywall. TLI Toolkit is a fan project by an independent developer, not affiliated with the game’s developer or publisher. See the terms of use and the privacy policy.

Are my runs shared, and can I see what’s sent or turn it off?

Sharing is on by default from version 0.1.0-beta.30: a notice says so once when the app starts, with Turn off right there (in older versions it is off until you turn it on). Settings → Community → Share my runs turns it off or back on at any time. See exactly what’s sent there shows the next upload byte for byte, and Delete my data removes everything you sent. What is sent and kept is in the privacy policy.

Does it work on Mac, Linux, Steam Deck or a phone?

No. TLI Toolkit is Windows only (10 or 11, 64-bit), and there is no phone app. This website, its guides and the strategy tables work on any phone or tablet.

Error 1027 or “network connection failed”

These are connection errors from the game or its servers, not from TLI Toolkit: the app only reads the game’s log file and picture and sits nowhere between you and the servers, so it can’t cause or fix them. Check the game’s official Discord or announcements for server news, and try again later. Our status page is about whether the app works with the current patch, not about the game’s servers.

Safety

Can I get banned for using it?

The app reads the log file the game writes itself, can look at the game window’s picture for screen reading (like a streaming program), and draws its own windows on top. It doesn’t read or change game memory, inject anything or send clicks or keys to the game, so there is nothing on the app’s side that touches the game client. It is an unofficial tool, though, so use it at your own risk. Safety & privacy. What it reads, exactly: the overlay guide.

Why is there no source code?

TLI Toolkit is free but closed source. The public releases repository hosts the downloads, release notes and bug reports. The open-source work it builds on is listed on Credits & licences.

How do I report a bug?

Press Ctrl+Alt+B in the app: it saves a zip with its own log, the last lines of the game log (character names, account ids and IP addresses taken out) and pictures of its own windows. Then open an issue, say what you did, what you expected and what happened, and attach the zip.

How do I ask for a feature?

Open the Request a feature page and press Propose an idea. Say what you are trying to do in the game and how you do it today. The ideas are read before they show. There you can also vote: three free votes a month, no account needed. Prefer email? Write to hello@tlitoolkit.com.

How do I contact you?

Email hello@tlitoolkit.com, or ask in public on GitHub issues, where bugs, questions and ideas are answered.